Sold out
FZB
Gear Box Gear Shaft
$0.00
FZB
Gear Box Gear Shaft
$0.00
Raw material:20CrNiMoA or 8620HHot forging the blank and machining to the finished partGear grade:9Heat treatment:carburizing treatmentSurface hardness:HV700 MinCase depth:0.7~1.17mmCore hardness:HRC30~45
Add to Compare
(Overall Length:60~120mm Diameter:φ30~φ65)
Gearbox Parts
Raw material:20CrNiMoA or 8620HHot forging the blank and machining to the finished partGear grade:9Heat treatment:carburizing treatmentSurface hardness:HV700 MinCase depth:0.7~1.17mmCore hardness:HRC30~45

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

Sold out
Hub
$0.00
Hub
$0.00
Raw material:25Machining the OD and ID,then hobbing the outer knurlThe knurl is diamond-shapedTolerance requirements on outer diameter:30 micronTolerance requirements on inner diameter:30 micron
Add to Compare
(Overall Length:10~20mm Diameter:φ50~φ80)
Automotive Steering System Components
Raw material:25Machining the OD and ID,then hobbing the outer knurlThe knurl is diamond-shapedTolerance requirements on outer diameter:30 micronTolerance requirements on inner diameter:30...

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

Sold out
Input Shaft
$0.00
Input Shaft
$0.00
Raw material:40Cr or ZF211External spline formed by cold forging,other feature machined by turning and milling processHeat treatment:quenching and temperingTolerance requirements on outer diameter:20 micronTolerance requirements on inner diameter:22 micronTensile strength: 780~930 N/mm²Zn-ni alloy electroplating on outer diameterThrough-hole machining by deep-hole...
Add to Compare
(Overall Length:100~250mm Diameter:φ8~φ35)
Automotive Steering System Components Recommend products
Raw material:40Cr or ZF211External spline formed by cold forging,other feature machined by turning and milling processHeat treatment:quenching and temperingTolerance requirements on outer...

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

Sold out
FZB
Input Shaft
$0.00
FZB
Input Shaft
$0.00
Raw material:ZF34CForging blank and machined spline by hobbing process,other feature machined by turing and grinding processHeat treatment:Induction harden on OD areaSurface Hardness:HRC50~55Core strength:500N/mm² MinDimension of part:φ62×89Tolerance on outer diameter:20 micronTolerance on inner diameter:13 micron
Add to Compare
(Overall Length:60~120mm Diameter:φ30~φ65)
Automotive Engine Parts Recommend products
Raw material:ZF34CForging blank and machined spline by hobbing process,other feature machined by turing and grinding processHeat treatment:Induction harden on OD areaSurface Hardness:HRC50~55Core...

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

Sold out
Insert nut
$0.00
Raw material:45 or S45CForging the six grooves and OD as a blank,External thread and inner hole machined by turning processHeat treatment-1:quenching and tempering to HV190-250Tolerance requirements on outer diameter:18 micronTolerance requirements on inner diameter:25 micronRoughness requirements:Ra0.8
Add to Compare
(Overall Length:60~120mm Diameter:φ30~φ65)
Gearbox Parts New products
Raw material:45 or S45CForging the six grooves and OD as a blank,External thread and inner hole machined by turning processHeat treatment-1:quenching and...

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

Sold out
Output shaft
$0.00
Output shaft
$0.00
Raw material:Medium-carbon alloy steelPre-treatment:Cold drawingExternal spline formed by cold forging,other feature machined by turning and milling processHeat treatment:Induction heat treatment to achieve hardness HRC50~55Tolerance requirements on outer diameter:10 micronTolerance requirements on inner diameter:8 micronTensile strength: 780~930 N/mm²
Add to Compare
(Overall Length:80~150mm Diameter:φ10~φ45)
Automotive Steering System Components Recommend products
Raw material:Medium-carbon alloy steelPre-treatment:Cold drawingExternal spline formed by cold forging,other feature machined by turning and milling processHeat treatment:Induction heat treatment to achieve...

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

Sold out
Output shaft
$0.00
Raw material:20CrMoMInternal interface formed by cold forging,two external spline formed by spline rolling in a single process,other feature machined by turning,milling and grinding processHeat treatment-1:Quenching and tempering to achieve 290 HV30Heat treatment-2:Induction heat treatment for 2 area to achieve HV400...
Add to Compare
(Overall Length:80~150mm Diameter:φ10~φ45)
Automotive Steering System Components New products
Raw material:20CrMoMInternal interface formed by cold forging,two external spline formed by spline rolling in a single process,other feature machined by turning,milling and...

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

Sold out
Pin
$0.00
Pin
$0.00
Raw material:16MnCr5HH or ZF6 All feature machined by turning and grinding processHeat treatment:carburizing treatment to HRC 59~63Case depth:0.5~0.8 mm.Core hardness:>=HRC 28Tolerance requirements on outer diameter:8 micronRoundness requirements:0.003Roughness requirements:Ra0.2
Add to Compare
(Overall Length:30~60mm Diameter:φ10~φ15)
Automotive Steering System Components
Raw material:16MnCr5HH or ZF6 All feature machined by turning and grinding processHeat treatment:carburizing treatment to HRC 59~63Case depth:0.5~0.8 mm.Core hardness:>=HRC 28Tolerance requirements on...

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

Sold out
Pinion
$0.00
Pinion
$0.00
Raw material:Low-carbon steelTwo of external spline formed by spline rolling and cold forging process,pinion machining after heat treatment by hard gear hobbing machine,other feature machined by turning,milling and grinding processHeat treatment:Carburizing and quenching+low temperingHardness requirements:HRC 58~63Tolerance requirements on outer diameter:12...
Add to Compare
(Overall Length:50~250mm Diameter:φ10~φ65 Gear accuracy:Grade 8)
Automotive Steering System Components New products
Raw material:Low-carbon steelTwo of external spline formed by spline rolling and cold forging process,pinion machining after heat treatment by hard gear hobbing...

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

Sold out
Shaft inter strg
$0.00
Shaft inter strg
$0.00
Raw material:45#Both spline formed by cold forging process,other feature processed by turning processThe total length of spline: 170mmHardness requirements: 90 HRB minimum
Add to Compare
(Overall Length:80~250mm Diameter:φ12~φ30)
Automotive Steering System Components
Raw material:45#Both spline formed by cold forging process,other feature processed by turning processThe total length of spline: 170mmHardness requirements: 90 HRB minimum

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

Sold out
Shaft inter strg
$0.00
Shaft inter strg
$0.00
Raw material:45#Both spline formed by cold forging process,other feature processed by turning and milling processThe total length of spline: 180mmHardness requirements: 90 HRB minimumBREAKING TORQUE OF SERRATED PART MUST BE 300 N'm MIN.
Add to Compare
(Overall Length:80~320mm Diameter:φ12~φ30)
Automotive Steering System Components
Raw material:45#Both spline formed by cold forging process,other feature processed by turning and milling processThe total length of spline: 180mmHardness requirements: 90...

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

Sold out
Shaft,Lower Assist
$0.00
Shaft,Lower Assist
$0.00
Raw material:Medium-carbon steelOne of external spline and internal spline formed by cold forging process,another external spline machined by gear shaping machine,thread and other feature machined by turning,milling and grinding processPre-treatment:Cold drawingHardness requirements:HRA58~64Tolerance requirements on outer diameter:10 micronTolerance requirements on  inner...
Add to Compare
(Overall Length:80~150mm Diameter:φ10~φ45)
Automotive Steering System Components featured products
Raw material:Medium-carbon steelOne of external spline and internal spline formed by cold forging process,another external spline machined by gear shaping machine,thread and...

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

Sold out
Shaft,Upper Assist
$0.00
Shaft,Upper Assist
$0.00
Raw material:Medium-carbon steelPre-treatment:Cold drawingHardness requirements:HRA58~64Both of external spline formed by cold forging process,the biggest OD also formed by cold forging process to save raw material,other feature machined by turning,milling and grinding processTolerance requirements on outer diameter:10 micronTolerance requirements on  inner...
Add to Compare
(Overall Length:100~250mm Diameter:φ8~φ35)
Automotive Steering System Components
Raw material:Medium-carbon steelPre-treatment:Cold drawingHardness requirements:HRA58~64Both of external spline formed by cold forging process,the biggest OD also formed by cold forging process to...

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

Sold out
Steering Shaft
$0.00
Raw material:16MnCr5HH or ZF6 External spline and internal spline machined by spline hobbing process, other feature machined by turning and grinding processHeat treatment:carburizing treatment to HRC 59~63Case depth:0.4~0.7 mm.Core strength:>=900 N/mm²Tolerance requirements on outer diameter:8 micronRoundness requirements:0.003Roughness requirements:Rz0.7
Add to Compare
(Overall Length:80~150mm Diameter:φ10~φ45)
Automotive Steering System Components featured products
Raw material:16MnCr5HH or ZF6 External spline and internal spline machined by spline hobbing process, other feature machined by turning and grinding processHeat treatment:carburizing...

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

Sold out
Steering Shaft
$0.00
Raw material:16MnCr5HH or ZF6 External spline and internal spline machined by spline hobbing process, other feature machined by turning and grinding processHeat treatment:carburizing treatment to HRC 59~63Case depth:0.4~0.7 mm.Core strength:>=900 N/mm²Tolerance requirements on outer diameter:8 micronRoundness requirements:0.003Roughness requirements:Rz0.7
Add to Compare
(Overall Length:80~150mm Diameter:φ10~φ45)
Automotive Steering System Components featured products
Raw material:16MnCr5HH or ZF6 External spline and internal spline machined by spline hobbing process, other feature machined by turning and grinding processHeat treatment:carburizing...

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

Sold out
Steering Shaft
$0.00
Raw material:16MnCr5HH or ZF6 External spline and internal spline machined by spline hobbing process, other feature machined by turning and grinding processHeat treatment:carburizing treatment to HRC 59~63Case depth:0.4~0.7 mm.Core strength:>=900 N/mm²Tolerance requirements on outer diameter:8 micronRoundness requirements:0.003Roughness requirements:Rz0.7
Add to Compare
(Overall Length:80~150mm Diameter:φ10~φ45)
Automotive Steering System Components
Raw material:16MnCr5HH or ZF6 External spline and internal spline machined by spline hobbing process, other feature machined by turning and grinding processHeat treatment:carburizing...

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

Sold out
FZB
Sun Gear Shaft
$0.00
FZB
Sun Gear Shaft
$0.00
Raw material:ZF34C, forging for blankHeat treatment:quenching and temperingHardness:HB228-263Tolerance on outer diameter:20 micronAccuracy of gear: Grade 8
Add to Compare
(Overall Length:120~250mm Diameter:φ30~φ65)
Automotive Engine Parts
Raw material:ZF34C, forging for blankHeat treatment:quenching and temperingHardness:HB228-263Tolerance on outer diameter:20 micronAccuracy of gear: Grade 8

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

Sold out
Wahser,retaining
$0.00
Wahser,retaining
$0.00
Raw material:Q460CAll the features processed by turning processWall thickness: 5.5 mm,easy to deform during processing due to the thin-wall.Tolerance on outer diameter: 0.07Tolerance on inner diameter: 0.07
Add to Compare
(Overall Length:3~5mm Diameter:φ80~φ100×φ80~φ100)
Automotive Steering System Components
Raw material:Q460CAll the features processed by turning processWall thickness: 5.5 mm,easy to deform during processing due to the thin-wall.Tolerance on outer diameter:...

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

You have successfully subscribed!