Sold out
Hub
$0.00
Hub
$0.00
Raw material:25Machining the OD and ID,then hobbing the outer knurlThe knurl is diamond-shapedTolerance requirements on outer diameter:30 micronTolerance requirements on inner diameter:30 micron
Add to Compare
(Overall Length:10~20mm Diameter:φ50~φ80)
Automotive Steering System Components
Raw material:25Machining the OD and ID,then hobbing the outer knurlThe knurl is diamond-shapedTolerance requirements on outer diameter:30 micronTolerance requirements on inner diameter:30...

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

Sold out
Pinion
$0.00
Pinion
$0.00
Raw material:Low-carbon steelTwo of external spline formed by spline rolling and cold forging process,pinion machining after heat treatment by hard gear hobbing machine,other feature machined by turning,milling and grinding processHeat treatment:Carburizing and quenching+low temperingHardness requirements:HRC 58~63Tolerance requirements on outer diameter:12...
Add to Compare
(Overall Length:50~250mm Diameter:φ10~φ65 Gear accuracy:Grade 8)
Automotive Steering System Components New products
Raw material:Low-carbon steelTwo of external spline formed by spline rolling and cold forging process,pinion machining after heat treatment by hard gear hobbing...

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

Sold out
Shaft inter strg
$0.00
Shaft inter strg
$0.00
Raw material:45#Both spline formed by cold forging process,other feature processed by turning processThe total length of spline: 170mmHardness requirements: 90 HRB minimum
Add to Compare
(Overall Length:80~250mm Diameter:φ12~φ30)
Automotive Steering System Components
Raw material:45#Both spline formed by cold forging process,other feature processed by turning processThe total length of spline: 170mmHardness requirements: 90 HRB minimum

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

Sold out
Shaft inter strg
$0.00
Shaft inter strg
$0.00
Raw material:45#Both spline formed by cold forging process,other feature processed by turning and milling processThe total length of spline: 180mmHardness requirements: 90 HRB minimumBREAKING TORQUE OF SERRATED PART MUST BE 300 N'm MIN.
Add to Compare
(Overall Length:80~320mm Diameter:φ12~φ30)
Automotive Steering System Components
Raw material:45#Both spline formed by cold forging process,other feature processed by turning and milling processThe total length of spline: 180mmHardness requirements: 90...

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

Sold out
Shaft,Lower Assist
$0.00
Shaft,Lower Assist
$0.00
Raw material:Medium-carbon steelOne of external spline and internal spline formed by cold forging process,another external spline machined by gear shaping machine,thread and other feature machined by turning,milling and grinding processPre-treatment:Cold drawingHardness requirements:HRA58~64Tolerance requirements on outer diameter:10 micronTolerance requirements on  inner...
Add to Compare
(Overall Length:80~150mm Diameter:φ10~φ45)
Automotive Steering System Components featured products
Raw material:Medium-carbon steelOne of external spline and internal spline formed by cold forging process,another external spline machined by gear shaping machine,thread and...

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

Sold out
Shaft,Upper Assist
$0.00
Shaft,Upper Assist
$0.00
Raw material:Medium-carbon steelPre-treatment:Cold drawingHardness requirements:HRA58~64Both of external spline formed by cold forging process,the biggest OD also formed by cold forging process to save raw material,other feature machined by turning,milling and grinding processTolerance requirements on outer diameter:10 micronTolerance requirements on  inner...
Add to Compare
(Overall Length:100~250mm Diameter:φ8~φ35)
Automotive Steering System Components
Raw material:Medium-carbon steelPre-treatment:Cold drawingHardness requirements:HRA58~64Both of external spline formed by cold forging process,the biggest OD also formed by cold forging process to...

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

Sold out
Wahser,retaining
$0.00
Wahser,retaining
$0.00
Raw material:Q460CAll the features processed by turning processWall thickness: 5.5 mm,easy to deform during processing due to the thin-wall.Tolerance on outer diameter: 0.07Tolerance on inner diameter: 0.07
Add to Compare
(Overall Length:3~5mm Diameter:φ80~φ100×φ80~φ100)
Automotive Steering System Components
Raw material:Q460CAll the features processed by turning processWall thickness: 5.5 mm,easy to deform during processing due to the thin-wall.Tolerance on outer diameter:...

You renderd the snippet swatch.liquid with the name of a product option — 'Title' — that does not belong to your product.

Use {% render 'swatch' with 'name of your product option here' %}

Example: {% render 'swatch' with 'Color' %}

This is case-sensitive! Do not put in 'color' if your product option name is 'Color'.

You have successfully subscribed!